prikaz prve stranice dokumenta Dimenzioniranje čelične nadstrešnice s otvorom u sredini
Access restricted to students and staff of home institution
master's thesis
Dimenzioniranje čelične nadstrešnice s otvorom u sredini
2022. urn:nbn:hr:157:239048
Posavac, Antun
University of Rijeka
Faculty of Civil Engineering
Department of Load Bearing Structures and Technical Mechanics
Chair of Load Bearing Structures

Cite this document

Posavac, A. (2022). Dimenzioniranje čelične nadstrešnice s otvorom u sredini (Master's thesis). Rijeka: University of Rijeka, Faculty of Civil Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:157:239048

Posavac, Antun. "Dimenzioniranje čelične nadstrešnice s otvorom u sredini." Master's thesis, University of Rijeka, Faculty of Civil Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:157:239048

Posavac, Antun. "Dimenzioniranje čelične nadstrešnice s otvorom u sredini." Master's thesis, University of Rijeka, Faculty of Civil Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:157:239048

Posavac, A. (2022). 'Dimenzioniranje čelične nadstrešnice s otvorom u sredini', Master's thesis, University of Rijeka, Faculty of Civil Engineering, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:157:239048

Posavac A. Dimenzioniranje čelične nadstrešnice s otvorom u sredini [Master's thesis]. Rijeka: University of Rijeka, Faculty of Civil Engineering; 2022 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:157:239048

A. Posavac, "Dimenzioniranje čelične nadstrešnice s otvorom u sredini", Master's thesis, University of Rijeka, Faculty of Civil Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:157:239048

Please login to the repository to save this object to your list.
Metadata
TitleDimenzioniranje čelične nadstrešnice s otvorom u sredini
Title (english)Design of steel structure of the canopy with opening in the middle
AuthorAntun Posavac
MentorMladen Bulić (mentor)
Committee memberŽeljko Smolčić (predsjednik povjerenstva)
Committee memberPaulina Krolo (član povjerenstva)
Committee memberMladen Bulić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Civil Engineering
(Department of Load Bearing Structures and Technical Mechanics)
(Chair of Load Bearing Structures)
Rijeka
Defense date and country2022-07-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Supporting Structures
Abstract
Unutar ovog diplomskog rada dimenzionirani su elementi čelične konstrukcije nadstrešnice tlocrtnih dimenzija 25,0 x 25,0 m s otvorom u sredini dimenzija 7,0 x 14,0 m. U radu su razrađene dvije varijante tj. dva modela konstrukcije. Predviđena lokacija građevine je grad Zagreb. Statička analiza oba modela konstrukcije provedena je pomoću programskog paketa Robot Structural Analysis Professional. Tijekom cijelog rada, u svrhu dimenzioniranja, koristile su se važeće europske norme i nacionalni dodaci. Ulazni podaci za dimenzioniranje u ''Robotu'' su vanjska djelovanja na konstrukciju, tj. snijeg, vjetar, stalno djelovanje i geometrija konstrukcije. Nakon što se dobiju rezne sile, koje su produkt dimenzioniranja, kreće se u dimenzioniranje spojeva. Dimenzionirani su karakteristični spojevi glavnih elemenata modela 1 i 2 te spoj ispunskih elemenata na glavni element u modelu 1. Korištena spojna sredstva u navedenim spojevima su vijci i zavari.
Abstract (english)
Within this graduate thesis the elements of the steel structure of the canopy with floor dimensions of 25.0 x 25.0 m with a hole in the middle measuring 7.0 x 14.0 m were dimensioned. The paper elaborates two variants, ie two construction models. The intended location of the canopy is the city of Zagreb. Static analysis of both construction models was performed using the Robot Structural Analysis Professional software package. Throughout the paper, for sizing purposes, valid European Standards and National Annexes were used. The input data for sizing in the "Robot" are external actions on the construction - snow, wind, continuous action and the geometry of the construction. Once the internal forces, which are the product of sizing, are obtained, the sizing of the construction joints starts. The characteristic joints of the main elements of models 1 and 2 and the joint of the filling elements to the main element in model 1 are dimensioned. The fasteners used in these joints are screws and welds.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:157:239048
Study programmeTitle: Civil Engineering; specializations in: Geotechnical Engineering, Hydraulic Engineering, Engineering Modelling, Structural Engineering, Transportation Engineering, Urban Engineering
Course: Structural Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka građevinarstva (magistar/magistra inženjer/inženjerka građevinarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-07-26 10:52:34