prikaz prve stranice dokumenta Performance of Novel U-Connector in CFS Truss-to-Column Bolted Connection under Axial Force
  Preuzmi
PDF 11.31 MB
Znanstveni rad - Izvorni znanstveni rad
Performance of Novel U-Connector in CFS Truss-to-Column Bolted Connection under Axial Force
Buildings, 13 (2023), 7; 1623. https://doi.org/10.3390/buildings13071623
Lukačević, Lazar; Krolo, Paulina; Bakran, Antonio; Palijan, Ivan

Citirajte ovaj rad

Lukačević, L., Krolo, P., Bakran, A. i Palijan, I. (2023). Performance of Novel U-Connector in CFS Truss-to-Column Bolted Connection under Axial Force. Buildings, 13. (7). doi: 10.3390/buildings13071623

Lukačević, Lazar, et al. "Performance of Novel U-Connector in CFS Truss-to-Column Bolted Connection under Axial Force." Buildings, vol. 13, br. 7, 2023. https://doi.org/10.3390/buildings13071623

Lukačević, Lazar, Paulina Krolo, Antonio Bakran i Ivan Palijan. "Performance of Novel U-Connector in CFS Truss-to-Column Bolted Connection under Axial Force." Buildings 13, br. 7 (2023). https://doi.org/10.3390/buildings13071623

Lukačević, L., et al. (2023) 'Performance of Novel U-Connector in CFS Truss-to-Column Bolted Connection under Axial Force', Buildings, 13(7). doi: 10.3390/buildings13071623

Lukačević L, Krolo P, Bakran A, Palijan I. Performance of Novel U-Connector in CFS Truss-to-Column Bolted Connection under Axial Force. Buildings [Internet]. 26.06.2023. [pristupljeno 12.05.2024.];13(7). doi: 10.3390/buildings13071623

L. Lukačević, P. Krolo, A. Bakran i I. Palijan, "Performance of Novel U-Connector in CFS Truss-to-Column Bolted Connection under Axial Force", Buildings, vol. 13, br. 7, Lipanj 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:157:780273. [Citirano: 12.05.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:157:780273
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Performance of Novel U-Connector in CFS Truss-to-Column Bolted Connection under Axial Force
AutorLazar Lukačević
AutorPaulina Krolo
MBZ: 309360
AutorAntonio Bakran
AutorIvan Palijan
Autorova ustanovaSveučilište u Rijeci
Građevinski fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Građevinarstvo
Sažetak (engleski)
This paper presents an experimental and numerical investigation of the tensile and compressive behaviour of a novel U-connector in the cold-formed steel (CFS) truss-to-column connection. Tensile tests were performed on 12 specimens representing the tension chords of the trusses in the connection. The results were used to validate a finite element model. The validated model was then subjected to both compressive and tensile loads, which revealed low stiffness in both the compressive and tensile components of the proposed connection. An optimisation of the geometry by using one long nut instead of two nuts was carried out to improve the behaviour and stiffness of the connection. The optimised results were compared with both experimental and numerical data, and conclusions were drawn regarding the effectiveness of the components in the proposed connection. The use of long-nut optimisation in the tension and compression components of the proposed connection shows a significant increase in load-bearing capacity, which makes it very promising for future applications in CFS truss-to-column connections. However, further validation through experimental testing is required to confirm the effectiveness and reliability of the connection in full-scale structures.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaBuildings
Brojčani podacivol. 13, br. 7, 1623
e-ISSN2075-5309
DOIhttps://doi.org/10.3390/buildings13071623
URN:NBNurn:nbn:hr:157:780273
Datum objave publikacije2023-06-26
ProjektŠifra: UNIRI INOVA
Naziv (hrvatski): INOVATIVNI PRIKLJUČAK ZA SPAJANJE KONSTRUKCIJSKIH ELEMENATA OD TANKOSTJENIH ČELIČNIH C- PROFILA
Naziv (engleski): INNOVATIVE CONNECTOR FOR CONNECTING STRUCTURAL ELEMENTS MADE OF THIN STEEL C-PROFILES
Voditelj: Paulina Krolo
Pravna nadležnost: Hrvatska
Financijer: UNIRI
ProjektŠifra: KK.01.2.1.02.0046
Naziv (hrvatski): Predgotovljene zgrade gotovo nulte energije proizvedene na industrijski način
Naziv (engleski): Prefabricated buildings of almost zero energy produced in an industrial way
Voditelj: Davor Grandić
Pravna nadležnost: Hrvatska
Financijer: ERDF
URL dokumentahttps://www.mdpi.com/2075-5309/13/7/1623
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2023-10-31 10:03:25