prikaz prve stranice dokumenta Characterisation of mode-I fracture resistance of adhesive layers with imperfections
  Preuzmi
PDF 2.78 MB
Znanstveni rad - Izvorni znanstveni rad
Characterisation of mode-I fracture resistance of adhesive layers with imperfections
Engineering Fracture Mechanics, 301 (2024); 110028. https://doi.org/10.1016/j.engfracmech.2024.110028
Škec, Leo; Alfano, Giulio

Citirajte ovaj rad

Škec, L. i Alfano, G. (2024). Characterisation of mode-I fracture resistance of adhesive layers with imperfections. Engineering Fracture Mechanics, 301.. doi: 10.1016/j.engfracmech.2024.110028

Škec, Leo i Giulio Alfano. "Characterisation of mode-I fracture resistance of adhesive layers with imperfections." Engineering Fracture Mechanics, vol. 301, 2024. https://doi.org/10.1016/j.engfracmech.2024.110028

Škec, Leo i Giulio Alfano. "Characterisation of mode-I fracture resistance of adhesive layers with imperfections." Engineering Fracture Mechanics 301 (2024). https://doi.org/10.1016/j.engfracmech.2024.110028

Škec, L. i Alfano, G. (2024) 'Characterisation of mode-I fracture resistance of adhesive layers with imperfections', Engineering Fracture Mechanics, 301. doi: 10.1016/j.engfracmech.2024.110028

Škec L, Alfano G. Characterisation of mode-I fracture resistance of adhesive layers with imperfections. Engineering Fracture Mechanics [Internet]. 05.2024. [pristupljeno 05.04.2025.];301. doi: 10.1016/j.engfracmech.2024.110028

L. Škec i G. Alfano, "Characterisation of mode-I fracture resistance of adhesive layers with imperfections", Engineering Fracture Mechanics, vol. 301, Svibanj 2024. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:157:372479. [Citirano: 05.04.2025.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:157:372479
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Characterisation of mode-I fracture resistance of adhesive layers with imperfections
AutorLeo Škec
AutorGiulio Alfano
Autorova ustanovaSveučilište u Rijeci
Građevinski fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Građevinarstvo
Sažetak (engleski)
In this work, a novel procedure to evaluate the influence of imperfections at the interface (such as voids and interfacial failure) on the fracture resistance of adhesive joints in mode-I debonding is proposed, based on an image-processing analysis of the crack surface. Its application to the characterisation of fracture resistance of aluminium DCB specimens bonded with an epoxy adhesive leads to a more accurate evaluation of the ‘effective’ fracture resistance by taking into account the distribution of imperfections along the interface, therefore also confirming that the typical oscillations and drops in the load–displacement curve can be attributed to the imperfections.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaEngineering Fracture Mechanics
Brojčani podacivol. 301, 110028
p-ISSN0013-7944
DOIhttps://doi.org/10.1016/j.engfracmech.2024.110028
URN:NBNurn:nbn:hr:157:372479
Datum objave publikacije2024-05
ProjektŠifra: 701032
Naziv (hrvatski): Modeliranje raslojavanja mješovitog moda ovisnog o brzini u slojevitim konstrukcijama korištenjem geometrijski nelinearnih grednih konačnih elemenata
Naziv (engleski): Modelling mixed-mode rate-dependent delamination in layered structures using geometrically nonlinear beam finite elements
Kratica: MOLAY-STRUDEL
Pravna nadležnost: eu
Financijer: Europska unija
Linija financiranja: Horizon 2020
URL dokumentahttps://linkinghub.elsevier.com/retrieve/pii/S0013794424001917
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2025-03-24 12:41:32